Features
- Volume of the package: 250.0
EVERBUILD MULTI-PURPOSE PREMIUM JOINERS GRADE WOOD FILLER is an easy to use ready mixed premium joiners grade filler ideal for filling small imperfections (max 5mm depth) in wood. Once dry, the filler leaves a sandable surface, which can be stained, painted, varnished or dyed, even with microporous stains. The filler is waterproof when dry and hence is suitable for exterior as well as interior applications.
Benefits
Non hazardous water based filler
Non flammable
Low odour
Ready to use no mixing of components required.
Areas For Use
Filling small holes, splits, surface imperfections and damaged areas in wood.
Covering the recesses left by nails and screws.
Limitations
As the filler may absorb some stains at different rates to the surrounding timber, always test a small area first. Note: filler may dry darker.
Do not exceed 5mm in one coat. For holes deeper than 5mm or for areas subject to impact such as doors and window frames, use EVERBUILD HIGH PERFORMANCE WOOD FILLER which can be applied to any depth and is shatterproof.
Protect from rain when used externally for at least 5 hours.
Do not apply below 5oC.
As the manufacturer cannot know all the uses its products may be put to, it is the users responsibility to determine suitability for use. If in doubt, contact technical services department for advice.
Surface Preparation
NOTE: If you intend to overstain the wood once filled ALWAYS CHOOSE THE COLOUR OF FILLER THAT NEAREST MATCHES THE WOOD YOU ARE FILLING NOT THE STAIN YOU INTEND TO USE. THIS FILLER MAY DRY TO A SLIGHTLY DARKER SHADE.
As the filler may absorb some stains at different rates to the surrounding timber, always test a small area first.
Before applying, ensure surfaces are clean, dry, sound and free from dust or any contaminants which may affect adhesion
Application
Stir well before use and apply with a spreader or knife. Fill the hole proud to allow for sanding. Once dry, sand to a smooth finish and apply required stain.








Reviews
There are no reviews yet.